Download  Print this page

HP Engage One 2D User Manual

Hide thumbs

Advertisement

User Guide

Advertisement

Table of Contents
loading

  Summary of Contents for HP Engage One 2D

  • Page 1 User Guide...
  • Page 2 L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 About This Guide This guide provides information on setting up and using the scanner. WARNING! Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT: Indicates information considered important but not hazard-related (for example, messages related to property damage).
  • Page 4 About This Guide...
  • Page 5: Table Of Contents

    Table of contents 1 Using the scanner ............................1 Connecting the scanner ............................1 Reading techniques ............................... 1 Scanning in hands-free mode ..........................2 Standard product defaults ............................. 2 Keyboard country ..............................2 Trigger ..................................3 Suffix ..................................3 Add code ID Prefix to all symbologies ........................4 Function code transmit ............................
  • Page 7: Using The Scanner

    Using the scanner Connecting the scanner Turn off power to the computer. Connect the scanner’s USB cable to a USB Type-A port on the I/O connectivity base. Turn on power to the computer. Reading techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read.
  • Page 8: Scanning In Hands-Free Mode

    Scanning in hands-free mode When the scanner is seated in the stand the scanner’s built-in sensor places the scanner in hands-free mode. When the scanner is removed from the stand it operates in its normal hand-held mode. Make sure that all cable connections are secure. Insert the scanner in the stand by placing the scanner onto the stand.
  • Page 9: Trigger

    Save NOTE: For a complete list of country codes, see the HP Engage One 2D Barcode Scanner Programming Guide at http://www.hp.com/support. Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (press the button to read) or Presentation Mode (the scanner is activated when it “sees”...
  • Page 10: Add Code Id Prefix To All Symbologies

    Scan the following bar code if you want to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) NOTE: For a complete list of Code IDs, see the HP Engage One 2D Barcode Scanner Programming Guide at http://www.hp.com/support. Function code transmit When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal.
  • Page 11: Programming Chart

    Clear All Data Formats Save Programming chart Programming chart...
  • Page 12 Save Chapter 1 Using the scanner...
  • Page 13: Technical Support

    If you can not solve a problem, you may need to call technical support. Have the following information available when you call: If the product is connected to an HP POS computer, provide the serial number of the POS computer ●...