Plessey Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Plessey Set Length 2

This feature specifies one of the barcode lengths for
page
224 Mode, or the second fixed length if in
Length includes the barcode's check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 3
instructions on setting this feature.
Table 3. Plessey Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
226
224. Length 2 is the maximum label length if in
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT PLESSEY LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
50 = Length 2 is 50 Characters
DEFAULT
Plessey Length Control on
Variable Length on page
Fixed Length on page 224
page 258
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
Programming Reference Guide
Mode.
for detailed
50 Characters
'5' AND '0'