Codabar Check Character Calculation - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Codabar Check Character Calculation

Enable this option to enables/disables calculation and verification of an
optional Codabar check character. When disabled, any check characters in the
label are treated as data characters.
DEFAULT
$CCBCC01
Codabar Check Character Calculation = Enable AIM standard
check char.
$CCBCC03
Codabar Check Character Calculation =
Programming Reference Guide


Enable NW-7
Enter/Exit Programming Mode
$CCBCC00
Codabar Check Character Calculation = Don't Calculate
$CCBCC02
Codabar Check Character Calculation = Enable Modulo 10
check char.


153