Msi Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

MSI Set Length 2

This feature specifies one of the bar code lengths for
page
194 Mode, or the second fixed length if in
Length includes the bar code's check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length). See
detailed programming instructions.
$CMSL2
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
194. Length 2 is the maximum label length if in
50 = Length 2 is 50 Characters
DEFAULT
MSI Length Control on
Variable Length on page
Fixed Length on page 194
"Set Length 2" on page 258 for more
~
CANCEL
Programming Reference Guide
MSI
Mode.