Codabar Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Codabar Set Length 2

This feature specifies one of the bar code lengths for
on page
page 159
Mode. The length includes the bar code's start, stop, check and data charac-
ters. The length must include at least one data character.
The length can be set from 3 to 50 characters in increments of two. A setting of
00 specifies to ignore this length (only one fixed length). See
page 258 for more detailed programming instructions.
Select CodabarLength 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
159. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CCBL2
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Codabar Length Control
Variable Length on
Fixed Length on page 159
"Set Length 2"
~
CANCEL
on
161