Code 128 Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 2

This feature specifies one of the bar code lengths for
on page
page 130
Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
132
130. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CC8L2
80 = Length 2 is 80 Characters
DEFAULT
Code 128 Length Control
Variable Length on
Fixed Length on page 130
"Set Length 2" on page 258 for
~
CANCEL
Programming Reference Guide
Code 128