Gs1 Databar Expanded Set Length 2 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

GS1 DataBar Expanded Set Length 2

This feature specifies one of the bar code lengths for
Length Control on page
able Length on page 104
page 104
The length can be set from 1 to 74 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select GS1 DataBar Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
106
104. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the bar code's data characters only.
$CXBL2
74 = Length 2 is 74 Characters
DEFAULT
GS1 DataBar
GS1 DataBar Expanded
Fixed Length on
"Set Length 2" on page 258 for
~
CANCEL
Programming Reference Guide
TM
Expanded
Vari-