Gs1 Databar Expanded Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

GS1 DataBar Expanded Set Length 1

This feature specifies one of the bar code lengths for
Length Control on page
Length on page 104
104 Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 74 characters. See
for more detailed programming instructions.
Select GS1 DataBar Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
104. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CXBL1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
GS1 DataBar Expanded
Variable
Fixed Length on page
"Set Length 1" on page 257
~
CANCEL
105