Intercode Delay - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The
selectable range for this feature is from 0 to 99 seconds. See
on page 240 for more detailed programming instructions.
Set Intercode Delay
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
30
$CKBID
00 = No Wedge Intercode Delay
DEFAULT
Intercode Delay
"Intercode Delay"
~
CANCEL
Programming Reference Guide