Codablock F Aim Check; Codablock F Length Control - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Codablock F AIM Check

Specifies if Check Digit calculation algorithm is AIM compliant or not.
$CCFAC01
Codablock F AIM Check = AIM compliant

Codablock F Length Control

This feature specifies either variable length decoding or fixed length decoding
for the Codablock F symbology.
Variable Length:
may be set.
Fixed Length:
DEFAULT
$CCFLC01
Codablock F = Fixed Length
208

For variable length decoding, a minimum and maximum length
For fixed length decoding, two different lengths may be set.

$CCFAC00 
Codablock F AIM Check = Not AIM compliant
DEFAULT
$CCFLC00 
Codablock F Length Control = Variable Length
Programming Reference Guide
Codablock F