Ack Nak Retry Count - HP Linear Barcode Scanner II Programming Reference Manual

USB-COM (RS-232 Simulated) Interface

ACK NAK Retry Count

This feature specifies the number of times the reader retries a label transmis-
sion due to a retry condition. The selectable range is from 1 to 254 retries. A
selection of 0 disables the count, and a selection of 255 specifies unlimited
retries. See
ming instructions.
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
"ACK NAK Retry Count"
$CR2AR
003 = 3 Retries
DEFAULT
Enter/Exit Programming Mode
on page 236 for more detailed program-
~
CANCEL
19