Installation Of Options; Option Module - Ikegami HTM-1990R Operation Manual

5. Installation of Options

5-1 Option Module

<Notes>
① Modules should be inserted into the slots specified in the figure below.
② Optional modules should be inserted into the slot Nos. 2-5.
(The figure below is an example. These modules may not be installed in the product you purchased.)
③ Slot 1 and Slot 6 accept the fixed modules only.
④ Remove the blank panel before you mount the module.
⑤ Fix the module securely with the two screws located at top and bottom.
⑥ Loose screws may cause the module to come off or result in poor connector contact.
MODEL NO.
DK-801A
DK-8012
DKM-511A/B
DKM-511*AV
DKM-511*AVD
1 2 3
MODULE NAME
4:2:2 Digital Component Module
4:2:2/4 Fsc NTSC Digital Module
Multi-Format Digital Module
Ditto with Embedded Audio Analog Output
Ditto with Embedded Audio AES/EBU Output
MODEL NO.
DE-811 NTSC 3/PAL-B Line Comb Decoder Module
MPU Module
This module is fixed to Slot 1, and cannot be inserted to other slot.
VIDEO PROCESS Module
This module is fixed to Slot 6, and cannot be inserted to other slot.
4 5 6
Module fixing screws
Fix the module securely by tightening these two
screws at top and bottom.
MODULE NAME
39
SLOT WIDTH
1
1
1
2
2
SLOT WIDTH
1