Table of Contents
Advertisement
5
OSD MENU SETTING
5.1 INPUT Select
Switching over the sources
A V 1
A V 2
S V I D E O
H D M I
P C
5.2 MENU Selection
Adjustments in the on-screen menu
1. To call the menu, press the button MENU, the first menu page is inserted.
In the toolbar at the top the menu pages aremarked as follows:
- 1st page PICTURE (depending on the video signal)
or
picture adjustment
- 2nd page SYSTEM
basic adjustment
- 3rd page FUNCTION (only available for the source PC)
manual picture adjustment
2. To select a menu page, go to the respective iconwith the button ◄ or ►.
3. To select menu items on one page, use the button ▼ or ▲.
4. If a menu item has been selected, change its value with the button ◄ / ►or select anadjusting option.
If only an arrow is shown behind a menu item, call a submenu or activate the function of the menu item with the button ►.
5. To exit a menu page and to return to the selection of the menu pages, press the button EXIT.
6. To deactivate the menu, press the button EXIT.
1. Press the button SOURCE. A list of sourcesis inserted,
the source presently selected is marked.
2. Select the source with the button ▼or ▲.
3. Confirm the selection with the button SELECT.
After switching over to the source, the identification of
the source and short information are briefly inserted.
If the selection of a source is not confirmed, the list is
automatically deactivated when the insertion time
adjusted in the menu has elapsed after the last button
has been pressed. The list can also be deactivated with
the button EXIT.
11
Advertisement
Table of Contents
