Table of Contents
Advertisement
STORAGE FOR A LONG TIME
Store the machine as shown in the following table if it will stop
for more than one month
Conditions
1. Cleaning
2. Lubrication
3. Battery
4. Cooling system
5. Hydraulic system
4-22 Inspection, Maintenance and Adjustment
1. Flush the chassis and wheel drive assy using HP water gun. Check for the
damage or the loose components.
1. Execute all routine lubrication operations.
2. Coat a layer of oil on the surface of the exposed metal parts, such as
hydraulic oil cylinder lever.
3. Coat oil on all control connecting components and at the control oil cylinder
(control valve plug etc) .
1. Fully charge the battery, remove battery or battery wires, and keep them in
reserve.
1. Check whether the anti-freeze fluid level in cooling fluid reservoir is correct.
2. Check every 90 days or 750 hours the anti-freezing conditions of anti-freeze
fluid or coolant using gravimeter. Refer to the required level for filling
anti-freeze fluid.
1. Start the engine once every month by referring to "Temperature Increase
Method for Hydraulic System" specified in this manual.
Maintenance requirements
Advertisement
Table of Contents
