Storage - Hyundai HL960A Operator's Manual

10. STORAGE

10. STORAGE
Maintain the machine taking care of following to pre-
vent the deterioration of machine when storing the
machine for a long time, over 1 month.
1) 1)
CLEANING THE MACHINE CLEANING THE MACHINE
Clean the machine.
Grease each lubrication part.
2) 2) LUBRICATION POSITION OF EACH PART LUBRICATION POSITION OF EACH PART
Change all oil.
※
Be particularly careful when you reuse the Be particularly careful when you reuse the
machine. machine.
As oil can be diluted during storage. As oil can be diluted during storage.
Apply an anticorrosive lubricant on the exposed Apply an anticorrosive lubricant on the exposed
part of piston rod of cylinder and in places part of piston rod of cylinder and in places
where the machine rusts easily. where the machine rusts easily.
3) 3)
MASTER SWITCH MASTER SWITCH
Turn OFF the master switch and store the
machine.
4) 4) Be sure to mix anticorrosive antifreezing solution
in the radiator.
5) 5) PREVENTION OF DUST AND MOISTURE PREVENTION OF DUST AND MOISTURE
Keep machine dry. Store the machine setting
wood on the ground.
※
Cover exposed part of piston rod of cylinder. Cover exposed part of piston rod of cylinder.
※
Lower the bucket to the ground and set a sup- Lower the bucket to the ground and set a sup-
port under tires. port under tires.
9
11
10
1 Lubricating manifold (left, 4EA)
3 Lubricating manifold (left, 4EA)
5 Center pivot pin (upper, 1EA)
6 Center pivot pin (lower, 1EA)
7 Steering cylinder rod (2EA)
8 Boom cylinder pin (rod side, 2EA)
9 Bellcrank (6EA)
10 Boom and bucket connecting pin (2EA)
11 Bucket link connecting pin (2EA)
12 Boom cylinder pin (frame side, 2EA)
4-25
12 1 5
8 7 6 3
960A4OP17
960A4OP18