Table of Contents
Advertisement
SHIPPING AND
TRANSPORTATION
Investigate the height, width and the allowed carrying capacity
in the passage of transportation line. The total height, total width
and total weight should not exceed the related regulations.
Please consult Hyundai or other agents for the solutions.
In order to prevent the safety accidents from being occurred
during the shipment of the machine, clear the ice and snow as
well as other slippery materials on the dock and wagon.
During shipping, please follow the laws and regulations
NOTE:
about the shipment height, width, length and weight is-
sued by State and local authorities.
Perform the shipping according to the procedures shown below:
1. Use wedges to stop the wheels of trailer or truck before
shipping.
2. Do not allow the steering operation on the way for the ma-
chine being driven on to the trailer or the truck. You should
back the vehicle to the flat ground, and then perform the
steering operation
3. After the machine is fixed, use frame-fixed bumper to fix the
front and rear frames.
4. Lay the bucket down to the transportation vehicle, put the
shifting manipulating handle on "Neutral Gear" position, and
put the neutral gear locking plate on "Locking" position.
5. Pull up the button of parking brake to apply parking braking.
6. The engine is switched off, and all switches are put to Mid-
dle position or "OFF position. Pull out the starter key.
7. Close and lock all doors, then take away the cab key.
8. When you use truck or trailer to transport the machine, you
must use wedges to stop the wheels and use steel cables to
fix the machine, so as to prevent the machine from moving
during transportation.
1-38 Safety
Advertisement
Table of Contents
