Table of Contents
Advertisement
3.
Remove old O-ring seal and install new O-ring seal (1, Fig.
10) onto bushing (2). Confirm that the O-ring seal on con-
necting rod cover (4) and bucket bushing has been thor-
oughly cleared.
4.
Align the bucket connecting rod cover and the bucket link
pin hole, and install bucket pin (3, Fig. 8).
5.
Install new O-ring seal 1(1, Fig. 9) into O-ring seal.
4-14 Inspection, Maintenance and Adjustment
Fig 9
Fig 10
Advertisement
Table of Contents
