Operationg Manchine - Hyundai HL630VL Operator's Manual

OPERATING MACHINE
Before starting engine, check follows:
1. Check the engine coolant level.
2. Check the engine oil level.
3. Check hydraulic oil level.
4. Check the leakage tightness for each oil pipe, water pipe and
each component.
5. Check battery connecting wires. If the connecting wires be-
tween battery and cables are found loosened, tighten them
timely.
6. Check Tire air pressure for normality.
Start engine
1. Remove the obstacles along the driving direction; pay at-
tention whether there is still repair man under the vehicle;
except the driver can operate in the cab, nobody is allowed
to stand at any position of the machine or sit in the cab.
2. Switch on the negative pole switch.
3. Get on or off the staircase according to the related regula-
tions.
The correct attitudes to get on/off the staircase (see Fig.4).
4. Adjust the rear-view mirror to have a good rear sight line,
and approach the equipment as much as possible.
5. Close the cab left and right doors.
6. Check seat belt for abnormality, and tie the seat belt se-
curely.
7. Check whether the shifting manipulating handle is at "Neu-
tral" position; if not, please toggle it to "Neutral" position.
8. Check whether the manipulating handle is at the middle
position. If not, please toggle it to the middle position.
Note: The instrument noted in the picture can pump oil au-
tomatically when it is necessary, and this course can
last for up to 5mins. Please wait for several minutes
after you switch on the start switch when the vehicle
has been parked for a long time.
9. Check whether the air flow switch for A/C system is at
"O" position and the transfer switch at "O" position. If not,
please toggle it to corresponding position.
10. Insert the key into electric lock and rotate clockwise one
increment. Switch on power supply and hoot the horn to
warn that this machine is to be started and that other per-
sons are not allowed to approach this machine.
11. Check fuel quantity.
3-6 Operation
Fig 4
Fig 5