Table of Contents
Advertisement
ADJUSTMENT OF REAR-VIEW
MIRROR
There is one rear-view mirror each above, on the left and right
side of the cab of this machine. Before operating this machine,
you must adjust the field of view to ensure the driver has a good
field of rear view.
Untighten the bolt connecting rear-view mirror support and cab
and rotate the support to adjust the position of the rear-view mir-
ror relative to the cab; Untighten the bolt connecting rear-view
mirror and support and rotate the rear-view mirror to adjust the
Fig 72
elevation angle of the rear-view mirror. After the above adjust-
ment, it is necessary to tighten the bolt.
2-40 Operation Controls
Advertisement
Table of Contents
