Table of Contents
Advertisement
Fire extinguisher and first-aid kit
In case of personal injury or fire happened, please operate as
follows
•
Find the Fire extinguisher and carefully read the operation
description on it to ensure that you can use it. It is recom-
mended to use the multi-functional "A/B/C" Fire extinguisher
with a weigh of greater than 2.27 kg [5 lb]. Put the fire ex-
tinguisher in the cab. Regularly check and maintain the fire
extinguisher and conduct the effective training for the field
personnel.
Put one first-aid kit inside the reserved box, and put another
on the site. Regularly check for the necessary of supple-
ment of first-aid kit.
•
Know what to do in case of injury from fire.
•
Keep emergency numbers for doctors, ambulance service,
hospitals and fire stations and put them by the side of the
telephone set.
If the equipment catches fire, it may cause serious personal
injury or even death. In case of fire during operation, escape
from the machine as follows
•
Shut off the starting switch, and stop the engine.
•
If there is time, use the fire extinguisher to put out the fire as
far as possible.
•
Use handrail and steps to escape from the machine.
The above is the basic method to escape from the equip-
ment. However, the method can be changed if necessary
according to the actual conditions. Therefore, it is necessary
to conduct the escape practice on site.
Prevent from falling objects or flying
objects
The collision of falling objects or flying objects on site with the
cab may cause dangers. Please select the protective devices
under appropriate operation conditions to protect the drivers.
Working in mine, tunnel, deep pit or on soft and wet surface, it is
possible to have the dangers from the falling stones or flying ob-
jects. The protective facility must be installed for the cab, and it
should accord with the requirements from FOPS (protective de-
vices for falling objects) or from protective devices for windows.
Fig 19
Fig 20
Safety 1-13
Advertisement
Table of Contents
