Table of Contents
Advertisement
Perform the following operations after 8
hours of running-in period:
1.
Completely check bolt and nut of each component for
the tightening. Especially you should check the following
components one time: diesel engine cylinder head bolt,
exhaust pipe bolt, and front/rear axle fixing bolts, rim nuts,
propeller shaft connecting bolt, diesel engine fixing bolt,
gearbox fixing bolt, front/rear frame hinged-type bolt.
2.
Check fan belt, generator belt, A\C compressor belt for the
degree of tightness.
3.
Check gearbox oil level, driving axle and diesel engine oil
levels.
4.
Check the hydraulic system and braking system for the
leakage tightness.
5.
Check the connecting and fixing of each manipulating pull
rod and throttle pull rod.
6.
Check the temperature and connections of each compo-
nent in electrical system, the status of generator power
supplying and the working conditions of lamps and lighting
as well as steering signal lamps.
Perform the following operations after
expiry of running-in period:
1.
Completely check bolt and nut of each component for the
tightening. Especially you should check the following com-
ponents one time: diesel engine cylinder head bolt, and
front/rear axle fixing bolts, rim nuts, propeller shaft con-
necting bolt, diesel engine fixing bolt, gearbox fixing bolt,
front/rear frame hinged-type bolt.
2.
Check fan belt, generator belt, A\C compressor belt for the
degree of tightness.
3.
Check the hydraulic system and braking system for the
leakage tightness.
4.
Change the transmission oil in gearbox, and lubrication oil
for driving axle.
5.
Replace gearbox oil filter, diesel engine oil filter, filter ele-
ment of diesel oil filter.
6.
Wash return oil filter element in hydraulic oil tank .
Note:
Before changing gearbox transmission oil, driving
axle lubrication oil and diesel engine oil, it is neces-
sary to perform according to the related operation
regulations.
Operation 3-3
Advertisement
Table of Contents
