Table of Contents
Advertisement
Wiper and scrubber
This machine is equipped with wiper for front window. The con-
trol switch is located handle-type combo-switch below the steer-
ing wheel.
1.
Front wiper switch
Front window wiper switch has three positions: STOP,
LOW SPEED and HIGH SPEED. The wiper can automati-
cally reset when the wiper in STOP state.
2.
Scrubber switch
Push scrubber switch, the scrubber will begin operation
to sprinkle the cleaning solution onto window glass. The
scrubber switch will automatically reset and the scrubber
will stop sprinkling after you release your hand. The scrub-
ber pot is located at the rear of driver seat
Fig 67
Frequently check whether the cleaning solution in the
sprinkler pot is exhausted to prevent the sight line being
obstructed due to the window which could not be cleaned by
the scrubber.
When the ambient temperature is lower than 0 ℃, it is
necessary to use anti-freeze cleaning solution, otherwise the
sprinkler will be iced or even be frozen and which will result in
its failure.
2-36 Operation Controls
WARNING
Advertisement
Table of Contents
