Table of Contents
Advertisement
B.
In the process of storage
Start the vehicle once a month to operation each system,
●
and fill lubrication grease to each movable axis pin, pro-
peller shaft, thus lubricating each movable part. Mean-
while, charge the battery also.
Wipe off the grease on the piston rod of hydraulic cylin-
●
der before starting vehicle.
Coat the anti-rust agent on the easily corrosive part.
●
Note:
If the anti-rust agent is used in the room, it is neces-
sary to open the door and window to remove toxic
gases.
C.
After storage
When the machine is stored for long time, you must oper-
ate as follows:
Replace the lubrication oil and hydraulic oil as well an-
●
ti-freeze fluid in engine, gearbox, driving axle.
Fill lubrication grease to each movable axis pin, propeller
●
shaft.
Wipe off the grease on the piston rod of hydraulic cylin-
●
der before starting vehicle.
Operation 3-13
Advertisement
Table of Contents
