Table of Contents
Advertisement
3.
Hazard Warning Light Switch
The hazard warning light is used when machine is
stopped because of a malfunction or when an emergency
occurs. When this switch is pressed, all directional indica-
tor lights on front and back of machine will turn "ON" and
"FLASH," warning others in the area. At the same time the
directional indicator lights on instrument panel will turn "ON"
to warn the operator
4.
Instrument small lamps
The small lamp switch can control the four small lamps in
front and rear to be lit up or off simultaneously. In addition,
it can also control the indicators for all rocker switches and
instrument lighting.
5.
Front Work lamp switch
Work lamp switch control the two work lamps in the ceiling
of the cab to be lit up or off simultaneously
: Do not turn "ON" the work lights when traveling
NOTE
on public roads
6.
Front lamp switch
This switch is the Main Switch to control front lamp to be
lit up or off
The "ON" and "OFF" conditions of the front lamp including
low beam and high beam are control by this front lamp
switch, and when you turn off this switch the front lamp
including low beam and high beam is not available
2-20 Operation Controls
Fig 22
Fig 23
Fig 24
Fig 25
Advertisement
Table of Contents
