Table of Contents
Advertisement
Check federal, state and local laws and regulations regarding
weight, width, and length of machine and load before making
preparations for transporting on public roads or highways.
The hauling vehicle, trailer, and load must comply with all
applicable laws and regulations.
Check the intended route for road width, overhead clearances,
weight restrictions, and traffic control regulations. Special
approval or permits may be required.
TRANSPORTING MACHINE
During shipping, please follow the laws and regulations
about the shipment height, width, length and weight issued
by State and local authorities.
On Another Vehicle
•
If the wheel loader is lifted onto another vehicle, the frame
lock bar must be in the "LOCKED" position.
•
"APPLY" parking brake and set the frame lock bar in the
"LOCKED" position.
•
Tie down (securing) the wheel loader – Use intended
attaching points for lifting. – Lock the articulated frame
joint.
Warning to customers: Removing from the machine the
counterweights, the front devices or other accessories
may affect the stability of the machine, thus causing the
accidental movement and serious injury or death. Our
company bears no legal responsibilities for the faults
induced from misusing the equipment. The machine the
counterweights or the front devices can be removed
only when the upper structure and the bottom structure
arrangement are consistent in direction.
NOTE
DANGER
Transportation
Transportation 5-1
Advertisement
Table of Contents
