Table of Contents
Advertisement
SEAT BELT
The driver seat of this machine is equipped with seat belt. The
driver shall tie the seat belt when operating the machine. Check
the wear and security of the seat belt before using it. Replace it
if necessary.
Adjust the length of the seat belt before using to ensure the
seat belt can play the role of safety guarantee and have certain
flexibility. You can adjust the length of the seat belt by changing
the spring bolt position on the seat belt. The locking device of
the seat belt is located at rear right side of the seat. Insert the
spring bolt into the opening of the locking device, the locking
device will clamp the spring bolt. There are two Red buttons by
side of the opening of the locking device. Push this red button,
and the spring bolt will spring out from the locking device. Be-
fore using seat belt, please check whether the locking device of
the seat belt can normally be locked or opened.
Operation Controls 2-39
Advertisement
Table of Contents
