Table of Contents
Advertisement
Parking of machine
1.
Drive the machine to a flat field. Confirm that there is no
risk of falling stones, landslip or flood.
2.
Apply service braking to stop the machine.
3.
Toggle the shifting manipulating handle to Neutral position.
4.
Push parking brake button to apply parking braking.
5.
Operate the manipulating handle of working device to low-
er down the arm, and lay down bucket on the ground, then
slightly press down the bucket.
6.
Let the engine operate at idle speed for 5 minutes to dissi-
pate the heat from each component.
7.
After using ENGINE STOP button and making engine shut
off, rotate electric lock key counterclockwise to "OFF" and
cut off the power supply for the vehicle, then pull out the
key.
8.
Toggle each switch to middle position or "OFF".
9.
Close left and right doors, and get off the staircase accord-
ing to the related regulations.
10. If you want to park the vehicle for a long time (e.g., for
a night), it is necessary to open the battery box cover to
toggle the power supply negative pole switch to SWITCH
OFF.
11. If the machine is not added with anti-freeze solution when
it is delivered from the factory, you should timely open all
water valves after parking the vehicle in winter to drain
out all cooling fluid in radiator of cooling system to prevent
from frost crack. If the machine is added with anti-freeze
solution when it is delivered from the factory, you should
operate with reference to the description on the An-
ti-Freeze Fluid Label at the tail of the vehicle.
12. Lock up all equipments and take away the key with you.
Park the machine on the flat ground. If it is neces-
Note:
sary to park the vehicle on the slope, please use the
wedge to stop the wheel to prevent the vehicle from
moving.
Fig 6
Operation 3-11
Advertisement
Table of Contents
