TATU PD PLUS Operator's Manual page 95

6. Adjustments and operations
Control valve operation
PD, PCA and PCA PLUS models are easy-to-operate and feature one (1) joystick-
controlled control valve to assure a precise equipment movimentation.
The speed to lift or to lower the equipment must be controlled by the joystick activation.
Leave it up on any position after lifting or lowering and it will return to a neutral position and
the equipment will remain on the position it was.
The joystick has a simple function: a simple movement forward or backward will move
the support and a movement to the right or to the left will tilt the agricultural bucket.
The button (A) will only work if the used accessory has a third function (as is the case
of the following: agricultural silage fork (GSA), agricultural loader fork (GCA) and the hay
claw (GRF), which features a pinching motion).
Lower Lower
A A
- The operator may adjust the joystick movimentation as desired by handling the hoses
coupled to the control valve.
- The third function button only works if it has an electric flow divider - DFE.
- The third function assembly is not applicable on this equipment model.
Neutral Neutral
Lift Lift
NOTE
Unload Unload
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Load Load
93