TATU PD PLUS Operator's Manual page 117

8. Maintenance
Filling up the reservoir
1. To fill up the oil reservoir, remove the cap (A), the air filtering (B), the oil dipstick
(C) and the o' ring (D) and fill up the reservoir using 50 liters of oil.
2. Check the oil level using the dipstick (C).
3. Cover the reservoir again using the parts described above.
4. Always use oil 68 with comproved quality and that follows the ISO VG 68 standard.
A
B
C
D
5. Activate the joystick and carry out the movimentation until reaching the cylinder
end course. Check if there are any leaks.
6. Complete the oil level until reaching the "minimum" and "maximum" indications on
the dipstick, being all cylinders totally retreated.
- Never mix different brands of oil.
- Never pour oil above the level.
NOTE
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
115