TATU PD PLUS Operator's Manual page 57

5. Assembly
Mahindra frame assembly
- The fixation system may change due to the tractor model.
- Tractor models:
• MHI: 8000 / 9200;
• MHI: 6075 / 8000S/ 9500S.
1. Assemble the right (01) and left frames on the right (05) and left (04) bars using
bolts (09), spring washers and nuts without totally tightening them.
2. Place the fixation base (03) on the right (05) and left (04) bars using bolts (10), flat
washers, spring washers and nuts.
3. On the side of the tractor, fasten the bushing (07) between the frame (01) and the
tractor engine using bolts (11) and spring washer.
4. On the front part of the frame, fasten it to the tractor engine using bolts (12) and
spring washer.
5. Tighten all parts simultaneously.
NOTE
04 04
03 03
07 07
11 11
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
01 01
12 12
05 05
09 09
10 10
55