Table of Contents
Advertisement
5. Assembly
BT tractor with control valve and quick coupler assembly
6. After assembling the frames, the control valve and releasing the connection, the
operator must carry out the next step.
7. Couple the pressure hose (E) on the tractor pump output (C) and on the control
valve input (F) to feed the control valve.
8. On the lower part of the control valve, fasten the pressure hose with return (G) that
connects the control valve to the rear part of the tractor using an adapter (H).
9. Couple the return hose (I) that connects the control valve to the return to the oil
reservoir on the tractor.
- For some tractor models, control valves with pressure passage will be used; for
other models, use a conventional control valve.
72
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
I
I
NOTE
C
C
F
F
E
E
G
G
H
H
Advertisement
Table of Contents
