TATU PD PLUS Operator's Manual page 85

5. Assembly
Moving support guide assembly
1. Assemble the moving support guide (A) to the support (B) using bolts (C), flat
washers, spring washers and nuts.
2. Fasten the guide bars (D) to the right and left frames using bolts (E) and spring
washer; lock the other end of the bars on the moving support (A) using bolts (F),
spring washers and nuts.
3. Lock the supports (B) on the right and left frames using bolts (G) and spring washer;
on the adjusting part of the supports (B) use bolts (H), flat and spring washers and
nuts.
G G
H H
PD Valtra PD Valtra
A750/850/950 A750/850/950
A A
E E
D D
B B
C C
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
F F
83