TATU PD PLUS Operator's Manual page 118

8. Maintenance
Oil and return filter replacement for the SHT models
1. Loosen up the plug (A) and let the oil flow out. Reserve this oil on an appropriate
container using a funnel if necessary.
2. Insert the plug again and fill up the reservoir using ISO VG 68 hydraulic oil.
3. Reservoir capacity: 50 liters; check the lever by the indicator on the dipstick (B).
4. The oil level must be checked daily, being the cylinders totally retreated.
5. The first filter and oil replacement must be done after 50 working hours; then, replace
after 250 working hours.
- Never start the engine when the oil is being replaced.
116
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
B
A
ATTENTION!