TATU PD PLUS Operator's Manual page 61

5. Assembly
Landini frame assembly
- The fixation system may change due to the tractor model.
- Tractor models:
• LDI: 145 / 175.
1. Assemble the right (01) and left frame to the rear right (05) and left fixation bars
using bolts (10), spring washers and nuts without totally tightening them.
2. Fasten the frame (01) on the tractor side using bolts (11), flat and spring washers.
3. On the front part part of the frame, fasten it to the tractor engine using bolts (12)
and spring washers.
4. Tighten all parts simultaneously.
5. Repeat the same procedure on the left frame.
NOTE
11 11
05 05
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
12 12
01 01
10 10
59