TATU PD PLUS Operator's Manual page 43

5. Assembly
LS frame assembly
- The fixation system may change due to the tractor model.
- Tractor models:
• LS: 80 / 90 / 100.
1. Assemble the right (01) and left frames to the rear fixation bar (03) using bolts (10),
spring washers and nuts without totally tightening them.
2. Place the plate (04) on the rear fixation bar (03) using bolts (12), flat washers,
spring washers and nuts.
3. On the side of the tractor, fasten the frame (01) to the tractor engine using bolts
(13), flat and spring washers.
4. On the front part of the frame, fasten it to the tractor engine using bolts (11) and
spring washers.
5. Tighten all parts simultaneously.
NOTE
13 13
03 03
04 04
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
01 01
10 10
12 12
11 11
41