TATU PD PLUS Operator's Manual page 53

5. Assembly
New Holland frame assembly
- The fixation system may change due to the tractor model.
- Tractor models:
• New Holland: 3880.
1. Assemble the right (01) and left frames to the rear right fixation bar (04) and to the
left one using bolts (08), spring washers and nuts, without totally tightening them.
2. Fasten the right plate (07) to the rear right bar (04) using bolts (09), flat washers,
spring washers and nuts.
3. Fasten the frame (01) to the tractor side using bolts (10), flat washers and spring
washers.
4. On the front part of the frame fasten it to the tractor engine using bolts (11) and
spring washers.
5. Tighten all parts simultaneously.
NOTE
01 01
10 10
04 04
07 07
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
08 08
09 09
11 11
51