5. Assembly
Joystick assembly on the platform (PD / PCA and PCA PLUS)
1. Lock the joystick support (A) on the tractor base using bolts (B), flat and spring
washers.
2. It is required to make the holes to fasten the joystick. If the platform does not have
the holes to pass the joystick cables, create holes with Ø 35 mm of diameter.
- The joystick support (A) must be on a place that will not prejudice the operator
ergonomics.
- Choose a place as flat as possible.
86
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
ATTENTION!
A
A
B
B
NOTE