TATU PD PLUS Operator's Manual page 59

5. Assembly
Landini frame assembly
- The fixation system may change due to the tractor model.
- Tractor models:
• LDI: 120 / 130.
1. Assemble the right (01) and left frames to the rear fixation right bar (05) and to the
left one using bolts (12), spring washer and nuts without totally tightening them.
2. Fasten the frame (01) to the tractor side using bolts (13), flat and spring washers.
3. On the front part of the frame, fasten it to the tractor engine using bolts (14), flat
and spring washers.
4. Tighten all parts simultaneously.
NOTE
13 13
05 05
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
14 14
01 01
12 12
57