Possible Dangers Caused By The Drilling Machine - Optimum OPTi drill DX 17V Operating Manual

required limit values Class B Group 1 according to EN 55011

Categorie C2
Required limit values class A Group 1 according to EN 55011, Installation by EMC experts

and warning: "This is a product of category C2 according to EN 61800-3. This product may
cause radio interference in a residential area. In this case, it may be necessary for the ope-
rator to take appropriate action."
Categorie C3
Required limit values class A group 2 according to EN 55011, whereby these limit values

are below those of class A group 1, plus warning: „This type is not suitable for connection to
a public low-voltage network supplying residential buildings. When connecting to a public
low voltage network, radio frequency interference is expected. "
This machine
Categorie
Environment
Voltage / Current
EMC knowledge
1.5

Possible dangers caused by the drilling machine

The drilling machine is state-of-the-art.
Nevertheless, there is a residual risk as the drilling machine operates with
at high speeds,

rotating parts,

electrical voltage and currents.

We have used construction resources and safety techniques to minimize the health risk to per-
sonnel resulting from these hazards.
If the drilling machine is used and maintained by personnel who are not duly qualified, there
may be a risk resulting from incorrect or unsuitable maintenance of the drilling machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
be duly qualified,

strictly follow these operating instructions.

In the event of improper use
there may be a risk to personnel,

there may be a risk to the machine and other material values,

the correct function of the drilling machine may be affected.

Always disconnect the drilling machine, and upright drill if cleaning or maintenance work is
beingcarried out.
WARNING!
The drilling machine may only be used with functional safety devices.
Disconnect the drilling machine immediately, whenever you detect a failure in the safety
devices or when they are not fitted!
EN
DX17V
40
C1 C2
Residential area
Business area
Industrial area
< 1000 V
no requirement Installation and commissioning by an EMC expert
Translation of original operating manual
C3 C4
Industrial area
> 1000 V
Version 2.0.2 - 2022-06-28
Safety