Technical Specification - Optimum OPTi drill DX 17V Operating Manual

2

Technical specification

The following information represents the dimensions and indications of weight and the
manufacturer's approved machine data for following stated machines.
Electrical connection
Setting the basic frequency to 60Hz, see Sinamics V20 operating instructions
Drive motor power
Drilling capacity
Drilling capacity in steel (S235JR)
Continuous drilling capacity in steel
(S235JR)
Spindle seat
Spindle stroke
Dimensions
Machine weight
Spindle speeds
infinitely variable
Emissions
Maximum sound pressure level at 1 m
distance from the machine and 1.60 m
above the ground.
Ambient conditions Temperature
Temperature
Relative humidity
CAUTION!
The machine operator should use hearing protection.
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine. Furthermore, the noise emission also depends on production
engineering factors, e.g. speed, material and clamping conditions.
EN
DX17V
44
230 V / 1 Ph ~50 Hz

72 dB(A) on no load running
Translation of original operating manual
1 kW
Ø 16 mm
Ø 13 mm
MT2
60 mm
Dimensions on page 44
73 kg
-1
50 - 4000 min
5 ~ 35 °C
25 - 80%
Technical specification
Version 2.0.2 - 2022-06-28