Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Optimum DX17V
Summary of Contents for Optimum DX17V
- Page 1 Operating manual Version 1.0.1 Bench drill...
-
Page 2: Table Of Contents
Drill chuck protection ..........................19 Control panel ............................19 Inspection and maintenance ..........................26 Ersatzteile - Spare parts - DX17V Bohrkopf - Drilling head - Spindelaufnahme B16 - Spindle seat B16 .............27 Bohrkopf - Drilling head - Spindelaufnahme MK2 - Spindle seat MT2 ...........29 Säule und Bohrtisch - Column and drilling table..................31... - Page 3 If you have any further questions after reading these operating instructions and you are not able to solve your problem with a help of these operating instructions, please contact your specialised dealer or directly the company. DX17V Page 3...
-
Page 4: Safety
230 V ~50 Hz Wiertarki Engenho de Furarde Bancada Masina de gaurit 73 kg Year Bänkborrmaskin Namizni vrtalni stroj Sütunlu Matkap INFORMATION If you are unable to rectify an issue using these operating instructions, please contact us for advice: DX17V Page 4... -
Page 5: Safety Instructions (Warning Notes)
Warning: danger of slip- Warning: risk of stumbling! Warning: hot surface! Warning: biological hazard! ping! Warning: automatic start- Warning tilting danger! Warning: suspended loads! Caution, danger of explo- sive substances! DX17V Page 5... -
Page 6: Intended Use
They could endanger the personnel and cause damage to the drilling machine. INFORMATION The control and drive components of the bench drilling machine are approved for industrial and commercial use within industrial supply systems. Utilization in public supply systems requires another configuration and/or additional measures. DX17V Page 6... -
Page 7: Reasonably Foreseeable Misuses
We have used construction resources and safety techniques to minimize the health risk to per- sonnel resulting from these hazards. If the drilling machine is used and maintained by personnel who are not duly qualified, there may be a risk resulting from incorrect or unsuitable maintenance of the drilling machine. DX17V Page 7... -
Page 8: Qualification Of Personnel
define and document the inspection deadlines for the machine in accordance with the Fac- tory Safety Act and perform an operational risk analysis in accordance with the Work Safety Act. DX17V Page 8... -
Page 9: Operator Positions
The power supply is interrupted by switching off the main plug. 1.11 Drilling table Seats for T-slots are attached to the drilling table. WARNING! Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on the drilling table. DX17V Page 9... -
Page 10: Personal Protective Equipment
Inform the operators in good time of any maintenance and repair works. Report all safety relevant changes and performance details of the drilling machine or their oper- ational behaviour. Any changes must be documented, the operating instructions updated and machine operators instructed accordingly. DX17V Page 10... -
Page 11: Disconnecting And Securing The Drilling Machine
Define and document the inspection deadlines for the machine in accordance with § 3 of the Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the Work Safety Act. "Electrical connection“ on page 16 DX17V Page 11... -
Page 12: Technical Specification
The noise behaviour of the machine might change depending on the age and wear of the machine. Furthermore, the noise emission also depends on production engi- neering factors, e.g. speed, material and clamping conditions. DX17V Page 12... -
Page 14: Assembly
3.3.2 Centre of Gravity with an Optional Machine Base CAUTION! In order to provide the necessary stability of the machine, the machine must be connected securely to its base. The machine base itself must be fastened firmly to the floor. DX17V Page 14... -
Page 16: Cleaning Of The Machine
All SINAMICS V20 single phase AC 230 V inverters (filtered or unfiltered) can be operated on a type A1) 30 mA or type B(k) 30 mA RCD. All SINAMICS V20 three phase AC 400 V inverters (unfiltered) can be operated on a type B(k) 30 mA RCD. DX17V Page 16... -
Page 17: Warming Up The Machine
500 min during the first hour of operation. If the drill is cold, e.g. immediately after having transported the machine, it should be warmed up at a speed of only 500 1/min for the first 30 minutes. DX17V Page 17... -
Page 18: Operation
Designation: Pos. Designation: Control panel EMERGENCY STOP push button "Control panel“ on page 19 Drilling lever Clamping lever drilling table Scale drill depth Main switch Drill chuck protection Height adjustment clamping screws for drill chuck protection DX17V Page 18... -
Page 19: Drill Chuck Protection
Drill depth as target value Depth indicator Spindle speed, Start Accuracy +- 1% Stop Tool selection - Drill - Screw tap Rotary knob Set zero point (workpiece Rotate, set values starting point) Confirmation key Press Enter, accept values DX17V Page 19... - Page 20 Do not press the buttons simultaneously, but one after the other and release them afterwards. If the symbol blinks, the drilling or thread depth can be adjusted with the rotary knob and confirmed with the Enter key. DX17V Page 20...
- Page 21 [ RPM ] Speed [ pcs ] Piece counter [ M02 ] Size of screw tap [ M03 ] [ M0... ] ..[ Ø 2 ] Drill diameter [ Ø 3 ] [ Ø .. ] ..DX17V Page 21...
- Page 22 offset INFORMATION Do not press the buttons simultaneously, press the first button and hold, press the second button and release both buttons afterwards. Select with the rotary knob and confirm by pressing the Enter button. DX17V Page 22...
- Page 23 To change the selection tool again, press the tool selection button again. Setting the workpiece offset: Put the drill bit or screw tap with the drilling lever onto the workpiece and set the workpiece zero Display: Depth display is set to "zero". 000.00 DX17V Page 23...
- Page 24 The spindle begins to roatate again as soon as the drilling lever is moved downwards. 4.3.10 Piece Counting Function The quantity of drilling lever movements for drilling and screw thread drilling are counted 0000 separately. Resetting the piece counter, see "Basic Value Setting“ on page DX17V Page 24...
- Page 25 Drill drift sleeve and of the drilling Drill sleeve spindle are superimposed. Loosen the taper mandrel Drill chuck or drill of the drill chuck with the help of a drill drift. Img.4-3: Disassembly DX17V Page 25...
-
Page 26: Inspection And Maintenance
Cleaning Housing "Obligations of the operating company“ on according to operator's page 8 experience, in accordance Electrical Electronics with German DGUV (BGV inspection "Electric“ on page 11 "Electric“ on page 11 DX17V Page 26... -
Page 27: Bohrkopf - Drilling Head - Spindelaufnahme B16 - Spindle Seat B16
Ersatzteile - Spare parts - DX17V Bohrkopf - Drilling head - Spindelaufnahme B16 - Spindle seat B16 5-1: Bohrkopf - Drilling head - B16 DX17V DE | GB... - Page 28 Fitting key 5x5x18 Winkel Angle 0302017066 Sensor Sensor 0302017067 Gasfeder Gas spring 0302017068 Platte Plate 0302017069 Bolzen Bolt 0302017070 LED- Leuche LED- Lamp 0302017071 Riemenscheibe Pulley Zahnwelle Gear shaft SIEMENS SINAMICS V20 SIEMENS SINAMICS V20 0302017074 DE | GB DX17V...
- Page 30 LED- Leuche LED- Lamp 0302016571 Riemenscheibe Pulley 0302016572 Zahnwelle Gear shaft 0302016573 Kugellager Ball bearing 6005 2Z 0406005.2Z DIN 3771 O-Ring O ring 34,5 x 3,55 - N - NBR SIEMENS SINAMICS V20 SIEMENS SINAMICS V20 0302017074 DE | GB DX17V...
-
Page 31: Säule Und Bohrtisch - Column And Drilling Table
ISO 4028 - M10 x 16 Zylinderstift Cylindrical pin ISO 8734 - 12 x 70 - A Schneckenrad Worm wheel 0302017058 Gewindestift Grub screw ISO 4028 - M5 x 10 Bolzen Bolt 0302017060 Klemmhebel Clamping lever 0302017061 Scheibe Washer 0302017062 DX17V DE | GB... -
Page 32: Schaltplan - Wiring Diagram
Schaltplan - Wiring diagram 5-3: Schaltplan - Wiring diagram DE | GB DX17V... -
Page 33: Ersatzteilliste Elektrische Bauteile - Spare Part List Electrical Components
Not-Aus-Schalter Emergency stop button 0302017023 Schalter Bohrfutterschutz Drill chuck switch 0302017021 0302016541 Steuerpanel Conrol panel Sensor Verfahrweg Traveling sensor 030201701B4 Näherungssensor Proximity sensor 030201701B5 Transformator Transformer 0302017027 Netzteil Power pack 030201701G8 LED Lampe LED Lamp 0302017071 DX17V DE | GB... -
Page 34: Appendix 6.1 Copyright
- Inattentive or incorrect handling and use of improper equipment - Unauthorized modifications and repairs - Insufficient installation and safeguarding of the machine - Disregarding the installation requirements and conditions of use - atmospheric discharges, overvoltage and lightning strokes as well as chemical influences DX17V Page 34... -
Page 35: Storage
Fragile goods (Goods require careful handling) Protect against moisture and humid environment "Environmental conditions temperature“ on page 12 Prescribed position of the packing case (Marking of the top surface - arrows pointing to the top) DX17V Page 35... -
Page 36: Note Regarding Disposal / Options To Reuse
As the machine operator, you should obtain information regarding the authorised collection or disposal system which applies for your company. DX17V Page 36... -
Page 37: Disposal Via Municipal Collection
We are required to perform a follow-up service for our products which extends beyond ship-ment. We would be grateful if you could send us the following information: Modified settings experiences with the bench drill and upright drill, which could be important for other users Recurring failures DX17V Page 37... - Page 38 Product designation: Bench drill Type designation: DX17V Serial number: _ __ __ __ __ Year of manufacture: 20__ Manual bench drill with frequency converter for speed control for workshops and industrial plants that meets all the relevant provisions of the above mentioned Directive 2006/42/EC as well as other applicable directives (below) including their amendments in force at the time of declaration.
Need help?
Do you have a question about the DX17V and is the answer not in the manual?
Questions and answers