Possible Dangers Caused By The Bench Drilling Machine; Qualification Of Personnel; Target Group - Optimum OPTi drill B 16H Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y

generally always drive the turning spindle out of the workpiece.
1.5

Possible dangers caused by the bench drilling machine

The bench drilling machine is state-of-the-art.
Nevertheless, there is a residual risk as the bench drilling machine operates with

at high speeds,

rotating parts,

with electrical voltages and currents.
We have used construction resources and safety techniques to minimize the health risk to per-
sons resulting from these hazards.
If the bench drilling machine is used and maintained by the staff who are not duly qualified,
there may be a risk resulting from incorrect or unsuitable maintenance of the bench drilling
machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

strictly follow these operating instructions.
In the event of improper use

there may be a risk to the staff,

there may be a risk to the machine and other material values,

the correct function of the bench drilling machine may be affected.
Always disconnect the bench drilling machine, and upright drill if cleaning or maintenance work
is beingcarried out.
WARNING!
The bench drilling machine may only be used with the safety devices activated.
Disconnect the bench drilling machine immediately whenever you detect a failure in the
safety devices or when they are not mounted!
All additional devices installed by the operator have to be equipped with the prescribed
safety devices.
This is your responsibility being the operating company!

"Safety devices" on page 60
1.6

Qualification of personnel

1.6.1

Target group

This manual is addressed to

the operating companies,

the users,

the staff for maintenance works.
Therefore, the warning notes refer to both operation and maintenance of the bench drilling
machine.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always disconnect plug of the bench drilling machine from the electrical power supply. This will
prevent it from being used by unauthorized staff.
The qualifications of the staff for the different tasks are mentioned below:
GB B16H | B16HV
Page 58
®
Translation of the original instructions
Safety
Version 1.1.8 dated 2018-9-13