Table of Contents
Advertisement
required limit values Class B Group 1 according to EN 55011
Categorie C2
Required limit values class A Group 1 according to EN 55011, Installation by EMC
expertsand warning: "This is a product of category C2 according to EN 61800-3. This prod-
uct may cause radio interference in a residential area. In this case, it may be necessary for
the operator to take appropriate action."
Categorie C3
Required limit values class A group 2 according to EN 55011, whereby these limit values
are below those of class A group 1, plus warning: "This type is not suitable for connection to
a public low-voltage network supplying residential buildings. When connecting to a public
low voltage network, radio frequency interference is expected."
This machine
Categorie
Environment
Voltage / Current
EMC knowledge
1.5
Possible dangers caused by the drilling machine
The drilling machine was built using state-of-the-art technology.
Nevertheless, there is a residual risk as the drilling machine operates with
at high speeds,
rotating parts,
electrical voltage and currents.
We have used design and safety engineering to minimize the health risk to personnel resulting
from these hazards.
If the drilling machine is used and maintained by personnel who are not duly qualified, there
may be a risk resulting from incorrect or unsuitable maintenance of the geared drill.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
be duly qualified
and strictly follow these operating instructions.
In the event of improper use
there may be a risk to personnel,
there may be a risk to the machine and other material values,
the correct function of the drilling machine may be affected.
Always disconnect the drilling machine if cleaning or maintenance work is being carried out, or
is no longer in use.
WARNING!
The drilling machine may only be operated with functional safety devices.
Disconnect the drilling machine immediately, whenever you detect a failure in the safety
devices or when they are not fitted!
EN
DX17E
8
C1
C2
Residential area
Business area
Industrial area
< 1000 V
no requirement
Installation and commissioning by an EMC expert
Translation of original instructions
C3
C4
Industrial area
> 1000 V
Version 1.0 - 2020-09-04
Safety
Advertisement
Table of Contents
