Possible Dangers Caused By The Drilling-Milling Machine; Qualification Of Personnel; Target Group - Optimum BF 30 Vario Operating Manual

Safety
WARNING!
Very serious injury due to improper use.
It is forbidden to make any modifications or alterations to the operating values of the dril-
ling-milling machine. These could endanger the staff and cause damage to the drilling-
milling machine.
1.3

Possible dangers caused by the drilling-milling machine

The drilling-milling machine was built using the latest technological advances.
Nonetheless there remains a residual risk, since the drilling-milling machine operates with
high revolutions, rotating
parts and tools,
electrical voltage and currents.
We have used construction resources and safety techniques to minimise the health risk to the
staff resulting from these hazards.
If the drilling-milling machine is used and maintained by personnel who are not duly qualified,
there may be a risk by the drilling-milling machine resulting from incorrect operation or unsuita-
ble maintenance.
All personnel involved in assembly, commissioning, operation and maintenance must
be duly qualified,
strictly follow this operating manual .
Disconnect the drilling-milling machine whenever cleaning or maintenance work is being carried
out.
WARNING!
The drilling-milling machine may only be used with the safety devices activated.
Disconnect the drilling-milling machine whenever you detect a failure in the safety
devices or when they are not fitted!
All additional installations carried out by the operator need to incorporate the prescribed
safety devices.
As the machine operator, this will be your
responsibility! „Safety devices" on page 8
1.4

Qualification of personnel

1.4.1

Target group

This manual is addressed to
the operator,
the user,
the maintenance staff.
The warning notes therefore refer to both operation and maintenance of the drilling-milling
machine.
Always disconnect the drilling-milling machine plug from the mains. This will prevent it being
used by unauthorised staff.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance need to
16 / 09 / 2008 Version 1.0.3 BF 30 Vario
OPTIMUM
M A S C H I N E N - G E R M A N Y
Drilling-Milling machine
Page 7