Unpacking The Machine; Transport; Anchoring The Drill; Centre Of Gravity Without A Machine Base, Dimensions - Optimum OPTi drill DX 17V Operating Manual

3.2

Unpacking the machine

Transport the drilling machine in its packing crate near its final installation location with a lift
truck before unpacking it. If the packaging shows signs of possible transport damage, take the
necessary precautions not to damage the machine when unpacking it. If any damage is
discovered, the carrier and/or shipper must be notified immediately to be able to initiate the
necessary steps for a claim.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, manuals and accessories supplied with the machine have been received.
3.3

Transport

The machine can be transported with forklifts or lift trucks. The commonly accepted and local
regulations regarding machine transport apply.
3.4

Anchoring the Drill

DANGER!
Danger of crushing and overturning. The drilling machine must be installed by several
people.

Check the horizontal orientation of the drill base with a water bubble level.

Check that the foundation has sufficient floor-load capacity and rigidity.

Anchor the machine base or the optional machine base onto the floor before positioning the
machine on it.
3.4.1 Centre of Gravity Without a Machine Base,
3.4.2

Centre of Gravity with an Optional Machine Base

CAUTION!
In order to provide the necessary stability of the machine, the machine must be
connected securely to its base. The machine base itself must be fastened firmly to the
floor.
Version 2.0.2 - 2022-06-28
Dimensions on page 44

Translation of original operating manual
DX17V EN
47