Cruise Control (If Equipped) - Suzuki Baleno Manual

OPERATING YOUR VEHICLE

Cruise control (if equipped)

The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel.
You can use the cruise control system
under the following conditions:
• For manual transaxle vehicle, the gear
position is in 3rd, 4th, 5th.
• For automatic transaxle vehicle, the
gearshift lever is in "D" position, or the
gear position is in 3rd, 4th, 5th or 6th in
the manual mode.
• For CVT vehicle, the gearshift lever is in
"D" position.
• The vehicle speed is about 40 km/h (25
mph) or higher.
WARNING
To help avoid loss of vehicle control,
do not use the cruise control system
when driving in heavy traffic, on slip-
pery or winding roads, or on steep
downhills.
3-51
Setting cruising speed
Cruise control switch
(2)
(1)
(3)
(4)
54P000361
(1) "CRUISE" switch
(2) "CANCEL" switch
(3) "RES +" switch
(4) "SET –" switch
Indicator lights
(For instrument cluster - Type B)
(5) (6)
68PM20301
(5) Cruise control indicator
(6) "SET" indicator
Information display
(For instrument cluster - Type C)
EXAMPLE
(5) (6) (7)
68PM20303
(5) Cruise control indicator
(6) "SET" indicator
(7) Set speed indication
1) Turn on the cruise control system by
pushing "CRUISE" switch (1). When the
cruise control indicator (5) comes on or
appears on the information display, you
can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push "SET –" switch (4), "SET" indica-
tor (6) comes on or appears on the
information display. At this time, set
speed indication (7) also appears on
the information display of type-C instru-
ment cluster. Take your foot off the
accelerator pedal and the set speed will
be maintained.
68PM2-01E