Suzuki VITARA Series Manual page 456

Selection of audio device (Select Audio)
Follow the instructions below to select an
audio device to be paired with from the
registered audio devices.
®
1) Press the Bluetooth setup button (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Setup Bluetooth", and
press the knob (2) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "List Audio", and press the
knob (2) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select an audio device to be
used, and press the knob (2) to deter-
mine the selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Select", and press the
knob (2) to determine the selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Confirm", and press the
knob (2) to complete the pairing.
NOTE:
• When selecting "Go Back", the previous
menu will be displayed.
• The phone will be disconnected when
®
the Bluetooth ready audio device is
selected.
List of audio devices (List Audio)
Follow the instructions below to display the
names of the registered audio devices in
sequence.
®
1) Press the Bluetooth setup button (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Setup Bluetooth", and
press the knob (2) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "List Audio", and press the
knob (2) to determine the selection.
The names of registered audio devices
will be displayed in sequence.
NOTE:
When selecting "Go Back", the previous
menu will be displayed.
Passkey setting (Set Passkey)
Follow the instructions below to set the
security number (Passkey).
®
1) Press the Bluetooth setup button (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Setup Bluetooth", and
press the knob (2) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Passkey", and press the
knob (2) to determine the selection.
OTHER CONTROLS AND EQUIPMENT
4) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "New Passkey", and press
the knob (2) to determine the selection.
5) Press or turn "TUNE/FLD
SOUND" knob (2) to select "Confirm".
6) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select a number for the first digit,
and press the knob (2) to determine the
selection. Select and determine num-
bers for the second, third and fourth
digits in order in the same manner.
When not entering up to the eighth
digit, enter blanks for the successive
digits.
7) Turn "TUNE/FLD PUSH SOUND" knob
(2) to determine the passkey setting.
NOTE:
When selecting "Go Back", the previous
menu will be displayed.
PUSH
5-80