Suzuki VITARA Series Manual page 142

Setting mode
When the ignition switch is in "ON" position
or the ignition mode is "ON" and the vehi-
cle is stationary, you can enter into the set-
ting mode of the information display by
pushing and holding the indicator selector
knob (3) for few seconds.
• To select the setting item that you want
to change, turn the indicator selector
knob (3) left or right.
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select "Back"
and push the indicator selector knob (3).
EXAMPLE
NOTE:
The currently selected setting item is sur-
rounded by a frame.
NOTE:
• If you push and hold the indicator selec-
tor knob (3) to enter into the setting
mode when the display (D) shows aver-
age fuel consumption, average speed,
driving time, total idling stop time and
total idling fuel saved (if equipped), the
value will be reset simultaneously. If you
do not want to reset the value, push the
indicator selector knob quickly to switch
the indication of the display.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be cancelled
automatically.
Distance unit
(Odometer / trip meter / driving range /
average speed distance unit setting)
You can change the units in which odome-
ter / trip meter / driving range / average
speed distance is displayed.
Fuel economy
(Fuel consumption unit setting)
You can change the units that fuel con-
sumption is displayed in.
Language
You can change the language of the infor-
53SB2023
mation display.
BEFORE DRIVING
Fuel reset
(Average fuel consumption reset set-
ting)
You can change when the value of aver-
age fuel consumption is reset.
Temperature
(Temperature unit setting)
You can change the units that temperature
is displayed in.
• To change the temperature unit, select
"Temperature" in "Setting mode". Then,
select "°C" or "°F".
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system (if equipped)
temperature display units will be changed
automatically.
Set sensors
(Parking sensor setting) (if equipped)
The parking sensor can be switched
between the normal mode and trailer
mode.
2-116