Suzuki VITARA Series Manual page 141

Table of Contents

Advertisement

BEFORE DRIVING
Selector position / Gearshift indica-
tor
EXAMPLE
(m)
Selector position
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to "ON", the dis-
play (E) indicates the transaxle selector
position (m).
(For Auto Gear Shift models)
When the gearshift lever in "D" range, the
display shows the current gear position (n).
For details on how to use the transaxle,
refer to "Using transaxle" in "OPERATING
YOUR VEHICLE" section.
Gearshift indicator
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
2-115
Trip meter (except for K14D engine
model and K15C engine model)
The display (F) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
(n)
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
74SB50202
trip meter selector knob (2) for few sec-
onds when the display shows the trip
meter.
Odometer (except for K14D engine
model and K15C engine model) /
Odometer and Trip meter (for K14D
engine model and K15C engine
model)
Except for K14D engine model and
K15C engine model:
The display (G) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
For K14D engine model and K15C
engine model:
The display (G) shows the odometer and
trip meter.
The odometer records the total distance
the vehicle has been driven. The trip meter
can be used to measure the distance trav-
eled on short trips or between fuel stops.
You can use trip meter A or trip meter B
independently.
To switch the display indication (G), push
the trip meter selector knob (2) quickly.
To reset the trip meter to zero, push and
hold the trip meter selector knob (2) for few
seconds when the display shows the trip
meter.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.

Advertisement

Table of Contents
loading

Table of Contents