Suzuki VITARA Series Manual page 144

Antitheft (Theft deterrent alarm system
setting) (if equipped) (Except for EU
specification vehicle)
You can switch the theft deterrent alarm
system from the enabled state to the dis-
abled state, and vice versa.
The state of the theft deterrent alarm sys-
tem is shown on the information display as
follows:
• Mode D: Enabled state
• Mode A: Disabled state
TPMS
(Tire pressure monitoring system set-
ting) (if equipped)
• You can check the current tire inflation
pressure on the information display.
• You can set one of the initial values of
tire pressure below that are indicated on
the tire information label.
– Comfort Mode
– Eco Mode (Except for K14D engine
model and K15C engine model)
– Load Mode
Refer to "Tire pressure monitoring system
(TPMS)" in "OPERATING YOUR VEHI-
CLE" section for details.
IS A/C
(ENG A-STOP system or strong hybrid
system setting) (if equipped)
• When using the automatic heating and
air conditioning system (if equipped),
you can select one of the following
engine auto stop settings.
– Standard
– Economy
– Comfort
• When "Economy" is selected, engine
auto stop condition is eased, compared
with "Standard". As engine auto stop
condition will occur more frequently, the
stop time will be longer, leading to reduc-
tion of fuel consumption.
• When "Comfort" is selected, engine auto
stop condition becomes severe, com-
pared with "Standard". As engine auto
stop condition will occur less frequently,
the stop time will be shorter, leading to
more comfortable cabin condition by air
conditioner.
BEFORE DRIVING
Display item
("Calendar dis" setting)
You can select whether you show the cal-
ender on the information display or not.
("Calendar form" setting)
You can change the calendar form of the
information display.
To change the calendar form, select "Cal-
endar form" in "Display item". Then, select
the display order of date, month and year.
("Fuel eco hist" setting)
Transitional indication of average fuel con-
sumption can be switched to time indica-
tion and driving cycle indication.
("Motion hist" setting)
Indication of G position history graph at the
vehicle stopped can be selected to enable
or disable.
("Idling disp" setting) (if equipped)
Display of ENG A-STOP operation with
ignition mode LOCK (OFF) is selectable to
indicate or not to indicate.
("Idling warn" setting) (if equipped)
You can switch whether the information
display shows the warning and indicator
messages related on the ENG A-STOP
system.
2-118